If you're looking for a great InMode clinic, be sure to check the difference in treatment design. Beomgye, Pyeongchon, Beomgye Station, Pyeongchon Station, Hogye-dong, Bisan-dong, Gwanyang-dong, Dongan-gu, Indeogwon, Geumjeong, Anyang

Things You Must Check When Looking for a Good InMode Clinic

When searching for a good InMode clinic, you will mostly find information about equipment names and prices.

However, there is a reason why treatment results can differ even when using the same InMode FX device.

The key lies not in the equipment, but in the pre-treatment design stage.

InMode FX Without Seated Design is Only Half the Story

InMode FX works by preheating the fat layer to over 40 degrees Celsius with RF (Radiofrequency), and then irreversibly destroying fat cell membranes with HVP (High Voltage Pulse).

As it strongly removes fat, special attention must be paid to side effects like cheek hollowing.

At Kkeut Clinic, design is always performed in a seated position before treatment.

Fat distribution differs between lying down and sitting up. Through seated design, areas prone to cheek hollowing are clearly avoided, and only sagging fat is precisely targeted.

If this process is omitted, energy can be delivered to unnecessary areas.

This is why you should first check whether a good InMode clinic performs seated design.

Same 6 Minutes, Different Results — The Difference in HVP Density Control

For InMode FX, the core is energy delivery time, not the concept of 'shots'. For effective fat breakdown, a minimum of 6 minutes of actual energy delivery per area is required.

Kkeut Clinic takes this a step further.

In the initial stage of treatment, we focus on rapidly raising the temperature to 40 degrees, setting a longer pulse duration. After reaching the target temperature, the pulse duration is shortened to increase the proportion of HVP delivery.

This method allows us to achieve fat cell death results equivalent to more than 10 minutes of conventional treatment, even with the same 6 minutes of treatment time.

Vacuum suction tightly adheres the subcutaneous fat layer to the handpiece, simultaneously increasing energy delivery efficiency.

Kkeut Clinic's Standard: Billing Only for Actual Energy Delivery Time

Some places include the time the device is turned on, the time the handpiece is moved, and preparation/waiting time as part of the treatment duration.

At Kkeut Clinic, billing is based solely on the pure treatment time recorded on the device monitor.

Time when energy is not actually delivered is not counted, and clients can verify this directly after the treatment.

The use of anesthetic cream for InMode FX is prohibited by the manufacturer's protocol. This is because anesthesia can mask the skin's immediate pain response, increasing the risk of burns. The heat sensation is at a level that can be comfortably tolerated without anesthesia.

After treatment, Kkeut Clinic records and shares the total energy (KJ) delivered on the day, the actual treatment time, and the focused target areas on a lifting card. This ensures seamless and consistent follow-up care regardless of which branch you visit.

Frequently Asked Questions

Q. What is the most important criterion to consider first when choosing a good InMode clinic?

A. If you're looking for a good InMode clinic, we recommend first checking whether they perform seated design before treatment and if billing is based on actual energy delivery time. Kkeut Clinic operates both of these as standard protocols.

Q. If bruising is severe after InMode FX treatment, does it mean the effect is better?

A. No. The actual effectiveness depends on how accurately the RF thermal energy and HVP pulses targeted the fat cells. Bruising is a personal variation depending on the vacuum pressure intensity and is unrelated to the effect. It usually subsides within 3 days to 2 weeks.

Q. How many InMode FX sessions are needed to see results?

A. According to relevant clinical evidence, approximately 5 periodic treatments are stable. The recommended frequency is every 1-2 weeks, but if weekly visits are difficult, a 2-4 week interval is also recommended.

Q. Does washing my face with cold water after treatment reduce its effectiveness?

A. Not at all. The core HVP fat cell death stimulation of InMode FX is already completed during the treatment itself. Post-treatment skin surface temperature management is unrelated to the effect. However, it's advisable to avoid activities that raise body temperature, such as exercise, sauna, or alcohol consumption, for 1-2 days.

Kkeut Clinic's Commitment

Kkeut Clinic precisely targets only sagging fat without the side effect of cheek hollowing, through its mandatory seated design protocol.

Kkeut Clinic's HVP density maximization technique yields superior fat cell death results within the same treatment time.

Kkeut Clinic operates a transparent system where billing is based solely on actual energy delivery time, and clients can verify this directly.

A Subtle Difference, Remarkable Results — Experience it at Kkeut Clinic.