Eyebrow Thread Lift vs. InMode FX: Comparing Effects and Recommended Candidates Beomgye, Pyeongchon, Beomgye Station, Pyeongchon Station, Hogye-dong, Bisan-dong, Gwanyang-dong, Dongan-gu, Indeogwon, Geumjeong, Anyang

When your eyebrows droop, your expression can look tired, or your overall impression might appear sharp or exhausted.

For this reason, more and more people are looking into eyebrow thread lifting procedures.

However, the cause of drooping eyebrows cannot be attributed to just one factor.

The required treatment approach can vary depending on whether the skin or fascia tissue has sagged, or if the fat around the eyebrows or on the forehead has thickened, making them appear heavy.

In this article, we compare and explain the working principles of eyebrow thread lifting and InMode FX, and in which cases each is suitable.

How Thread Lifting Works

Eyebrow thread lifting is a procedure that physically pulls up sagging tissue by inserting absorbable threads under the skin.

As the inserted threads hook and pull the sagging tissue, you can expect immediate lifting changes right after the procedure.

Over time, collagen forms around the threads, which can also help improve skin elasticity.

The procedure time may vary depending on the area, but it generally takes around 20 to 30 minutes.

Since threads are inserted into the skin, mild bruising or swelling may appear for a few days.

This procedure can be helpful when the primary cause is the sagging of the skin and fascia itself.

It is suitable for those whose outer corners of the eyebrows droop, making their impression look sharp or tired.

It can also be considered if the skin of the eyelids itself has sagged, and the drooping is visible to the naked eye.

This procedure is suitable for those who desire quick lifting changes.

InMode FX differs from eyebrow thread lifting in its approach.

InMode FX is a device that uses radiofrequency (RF) energy and high-voltage pulses (HVP) to reduce fat.

The method involves preheating the fat layer to 40 to 43 degrees Celsius with RF energy, then delivering HVP to induce irreversible damage to fat cell membranes.

Fat cells only respond to HVP when sufficiently heated, so the preheating and destruction phases must proceed in the correct sequence.

This device from InMode, Israel, uses the Mini FX handpiece, specialized in destroying deep fat layers.

The vacuum suction method brings the subcutaneous fat layer into close contact with the handpiece, enhancing energy delivery efficiency.

It is designed with a thermal sensor that checks skin temperature 1000 times per second to reduce the risk of burns.

Thanks to its safety-first design, rather than expecting significant changes from a single session, the key to this procedure is accumulating energy multiple times within a safe range.

It can be helpful when eyebrows, forehead, or eyelids appear saggy due to thick fat deposits.

It is suitable for those whose concern is a heavy impression caused by fat accumulation rather than skin sagging.

It can also be considered for those who wish to improve facial contours by reducing fat volume without surgery.

Purpose of Eyebrow Thread Lifting and InMode FX

If eyebrow sagging is due to reduced skin elasticity, eyebrow thread lifting may be more suitable.

If the primary cause of eyebrow sagging is the weight from fat accumulation, InMode FX may be more effective.

If both causes are at play, considering both procedures together is also an option.

To accurately determine which procedure is suitable, it is essential to first consult with a medical professional for a diagnosis.

For InMode FX, meaningful results can be expected only if energy is sufficiently applied for at least 6 minutes per area.

We usually recommend cumulative treatments of about 5 sessions at 1- to 2-week intervals.

InMode FX is performed without the separate use of anesthetic cream, according to the treatment protocol.

This is to check the immediate reaction of the skin during the procedure and reduce the risk of burns.

Bruising may occur after the procedure due to strong negative pressure, but the presence or extent of bruising does not indicate the effectiveness of the treatment.

Bruising varies depending on individual skin type and usually disappears gradually within 3 days to 2 weeks.

Adequate hydration can help facilitate the efficient expulsion of destroyed fat cells from the body.

At our clinic, InMode FX treatment costs are calculated differently.

We do not calculate waiting time or device power-on time; instead, costs are based solely on the actual time energy is delivered to the skin.

After the procedure, we explain to patients so they can directly verify the actual energy irradiation time displayed on the equipment monitor.

Before the InMode FX procedure, the design process is always carried out in a sitting position.

In a supine position, tissues that have sagged due to gravity may appear to lift, making it difficult to accurately assess the actual degree of sagging.

By planning the treatment area in a sitting position, we can preemptively avoid areas where cheek hollowing might occur and precisely deliver energy only to areas that require fat reduction.

Our HVP Energy Delivery Technique

In the initial stages of the procedure, we use a method of maintaining a long pulse duration to rapidly increase the temperature of the treatment area.

Once the skin reaches the target temperature, the pulse duration is shortened to efficiently increase the delivery rate of HVP (High Voltage Pulse) energy.

Through this method, we can expect more effective results in fat cell reduction within the same treatment time.

Once the procedure is complete, we fill out a lifting card and share its contents with the patient.

We record in detail the total energy delivered on the day of the procedure, the actual treatment time, and the target areas that were intensively treated.

This record serves as a reference for future visits, helping us maintain consistent and accurate treatment.

Frequently Asked Questions

Q. Can I receive eyebrow thread lift and InMode FX together?

A. If the cause of eyebrow sagging lies in both skin and fat tissue, then considering an eyebrow thread lift and InMode FX together may be an option. The appropriate proportion of each treatment is best determined through consultation with medical staff.

Q. How long do the effects of an eyebrow thread lift last?

A. The duration of treatment effects may vary depending on individual skin elasticity and the rate at which the threads are absorbed. Eyebrow thread lift also influences collagen production, so you can expect natural changes over time.

Q. Can InMode FX be received instead of an eyebrow thread lift?

A. If the primary cause of eyebrow sagging is fat accumulation, InMode FX may be more suitable. However, if the tissue itself has significant laxity, the physical traction effect of an eyebrow thread lift may be more necessary.

Q. Is an eyebrow thread lift procedure very painful?

A. You may feel a slight pressure during the thread insertion process. Compared to InMode FX, an eyebrow thread lift is performed after anesthesia, so most patients find the procedure relatively comfortable.

Our Treatment Philosophy

We strive to ensure patients receive reasonable treatment through a transparent payment system based on actual energy irradiation time.

By applying precise design in a sitting position and our devised HVP energy delivery technique, we aim to increase the expected outcome of the treatment.

Lifting card records are used to maintain consistency in treatment and enhance safety and predictability of results.

Results Created by Meticulous Care If you have any questions about the procedure, we recommend inquiring through a consultation.