Is it possible to have Shurink and Onda treatments simultaneously? Beomgye, Pyeongchon, Beomgye Station, Pyeongchon Station, Hogye-dong, Bisan-dong, Gwanyang-dong, Dongan-gu, Indeogwon, Geumjeong, Anyang

Q. Can Shurink and Onda be performed together?

A. Shurink and Onda are procedures that create synergy when performed together.

For this reason, we recommend receiving them in combination.

Why the Onda + Shurink combination at Kkeut Clinic is different

At Kkeut Clinic, all lifting procedures are performed based on

a “layer-by-layer structural design” approach.

By combining

Onda (3 mm, 7 mm) and Shurink (SMAS layer, 4.5 mm),

we precisely design treatment across the entire depth of the skin—

from the dermis to the SMAS layer to the fat layer.

This combination is not a simple parallel treatment,

but a structural design that maximizes effects through clear role division by layer.

Core principles of lifting at Kkeut Clinic (“the subtle but critical difference”)

① Seated design is mandatory before treatment

This is done to accurately assess

facial gravity direction, fat distribution, and volume structure.

② A “Lifting Card” is provided after treatment for full transparency

Details such as

treated layers, energy intensity, number of shots, and device modes

are clearly organized and transparently shared with the patient.

​

**③ Onda lifting follows a

“high intensity + slow movement initially → faster movement later” strategy**

• Early phase: maximize heat accumulation

• Later phase: reduce pain while maintaining thermal energy

​

**④ Shurink is performed at an intensity comparable to Ultherapy,

with DOT mode used in combination**

Even if the procedure takes longer,

energy density and focus are increased

to induce structural lifting effects.

​

Procedure Notes Q&A

Q1. Why should Onda and Shurink be performed together?

Because aging does not occur in a single layer.

• Onda targets the dermis (3 mm) and fat layer (7 mm)

• Shurink targets the SMAS layer (4.5 mm)

When used together,

the entire depth of the skin can be lifted as one unified structure.

​

Onda 3 mm → collagen regeneration

Onda 7 mm → reduction of fat cells

Shurink 4.5 mm → SMAS layer lifting

​

By stimulating each layer separately,

lifting effect, durability, and elasticity improvement increase simultaneously.

Q2. Is there really a synergistic effect when Onda and Shurink are combined?

Yes.

Although each device targets different layers,

the heat generated is subtly transmitted to adjacent layers,

creating an overall temperature rise.

This allows each device to

reach its target temperature more efficiently,

resulting in a more effective lifting response.

This is a natural synergistic structure

that can also be explained clinically.

​

Q3. How is Onda lifting performed?

At Kkeut Clinic, the following principles are strictly followed:

• Early phase: slow handpiece movement to maximize heat accumulation

• Mid-to-late phase: faster movement to reduce pain while maintaining effect

• Application of an early high-intensity strategy to secure sufficient temperature elevation

Because movement speed and initial intensity strategy greatly affect outcomes,

speed and intensity are adjusted for each session according to the design.

​

Q4. How is Shurink performed?

Shurink is performed at an energy level comparable to Ultherapy.

In addition,

DOT mode, which follows a pattern similar to Ultherapy,

is used in combination to increase energy concentration.

With this design, Shurink is not used as

a simple “maintenance lifting” treatment,

but as a true structural lifting procedure intended to elevate the SMAS layer.

Q5. Why is design so important when combining Onda and Shurink?

Because each layer has a different role,

the ratio, number of shots, and energy distribution must vary by individual face.

For example:

• In patients with low facial volume,

• excessive use of 7 mm Onda may cause cheek hollowing.

• In patients with a weak SMAS layer,

• intensity and vector design of Shurink become more critical.

Therefore, Kkeut Clinic consistently applies the principle of:

“Seated design → Supine treatment”

to all lifting procedures

Q6. Why is a Lifting Card provided after treatment?

Because lifting is not a simple repetitive procedure like laser toning,

but one where “the accumulation of design” is crucial.

By transparently recording

which layer was treated and at what intensity each time,

the accuracy of future treatment design improves,

and progress evaluation becomes clearer.

The Lifting Card at Kkeut Clinic includes:

• Energy and number of shots for each lifting procedure

• Modes used (such as DOT mode)

These records are essential reference data for precise lifting design.

Q7. Who should consider combined Onda + Shurink treatment?

Combined lifting is recommended if one or more of the following apply:

• Decreased elasticity with simultaneous fat accumulation

• Loss of jawline or nasolabial contour

• Need for structural lifting, not just skin tightening

• Desire for long-lasting lifting results

Addressing layer-specific problems with layer-specific devices

is the most efficient approach.

Conclusion

Combining Onda and Shurink is not simply

“using two devices together.”

​

It is a design-based lifting approach that

clearly assigns functions to each layer

and combines the appropriate intensity and strategy for each layer.

At Kkeut Clinic,

design, intensity, speed, mode selection, and post-procedure documentation

are all standardized to support this structure.

​