Volnewmer 300 Shots vs 600 Shots: Why We Strongly Recommend 600 Shots? Beomgye, Pyeongchon, Beomgye Station, Pyeongchon Station, Hogye-dong, Bisan-dong, Gwanyang-dong, Dongan-gu, Indeogwon, Geumjeong, Anyang

Volnewmer 300 shots vs 600 shots comparison — Why does Kkeut Clinic recommend 600 shots?

When you receive a Volnewmer consultation, one of the first questions that arises is:

How should the number of shots be determined?

The comparison between Volnewmer 300 shots and 600 shots is not simply a matter of treatment time or intensity.

Area coverage, cumulative thermal effect, and HVP occurrence frequency — these three factors fundamentally change depending on the number of shots, which is why Kkeut Clinic first explains the 600-shot option.

Coverage is different — the realistic limitations of 300 shots

With Volnewmer, one shot is delivered each time the handpiece touches the skin.

When proceeding with 300 shots, it is difficult to evenly cover the entire face.

To sufficiently cover areas that require heat, such as the lines next to the nasolabial folds, the area below the jawline, and the center of the cheeks, an adequate number of shots must be ensured.

300 shots are primarily focused on specific areas, and there are structural limitations to uniformly stimulating the entire surface.

600 shots allow for full coverage of the entire face and sides, with enough leeway to add more layering to concentrated areas.

At Kkeut Clinic, before the treatment, a grid design is first drawn with the tip while the patient is in a sitting position.

This process involves confirming the sagging in the direction of gravity and the actual volume distribution, then designing how many shots will be allocated to which area.

With 300 shots, there are not enough shots to fill this grid.

Cumulative Thermal Effect — The more shots, the higher the temperature in the dermal layer

The working principle of Volnewmer is to deliver radiofrequency energy deep into the collagen layer of the dermis.

Heat is delivered even with a single shot, but the true effect of Volnewmer lies in the accumulated heat from repeated stimulation promoting collagen regeneration.

Kkeut Clinic applies the Superpass technique.

This method involves repeatedly passing over the same area at a consistent speed and pressure, accumulating energy in the dermal layer.

With 300 shots, there are simply not enough areas to adequately apply the Superpass technique.

With 600 shots, passes can be repeated in each area to stably increase the dermal temperature.

Ultimately, the cumulative thermal effect is proportional to the number of shots.

HVP Occurrence Frequency — Why 600 shots have the advantage

HVP (High Vibration Pulse) is a phenomenon where the handpiece vibrates and signals when the skin reaches the appropriate temperature range during a Volnewmer treatment.

The more HVP occurs, the more it signifies that the treated area has sufficiently reached the target temperature.

With 300 shots, the entire area must be covered quickly, leaving insufficient time to confirm HVP at each point.

With 600 shots, there is enough time to dwell in one area, confirm HVP occurrence, and use that feedback to decide whether to proceed with the next pass.

Kkeut Clinic's principle is to customize treatments to increase HVP frequency.

HVP is an objective indicator of treatment quality.

If this difference is overlooked in the Volnewmer 300 shots vs 600 shots comparison, it might simply be perceived as a difference in time.

Kkeut Clinic's Volnewmer 600-Shot Protocol

At Kkeut Clinic, before Volnewmer treatment, a grid design is drawn while the patient is in a sitting position.

This is to design the 600-shot distribution areas based on the sagging patterns visible in the direction of gravity.

After the treatment, a lifting card is prepared and shared.

This records the treatment date, number of shots delivered, focus areas, energy level, etc., enabling comparison and management with the same criteria for subsequent sessions.

Frequently Asked Questions

Q. When comparing Volnewmer 300 shots vs 600 shots, do 300 shots not yield any effect?

A. In the comparison between Volnewmer 300 shots and 600 shots, 300 shots are not entirely ineffective. However, the achievable coverage area is reduced, and it becomes difficult to adequately apply the Superpass technique and HVP confirmation. For these reasons, Kkeut Clinic primarily recommends 600 shots.

Q. Is the pain more severe with 600 shots?

A. Energy level and treatment speed have a more direct impact on pain than the number of shots. Kkeut Clinic proceeds by distributing and accumulating energy through the Superpass technique, so 600 shots do not necessarily mean greater discomfort.

Q. Volnewmer 300 shots vs 600 shots comparison — Does it vary depending on skin condition?

A. At Kkeut Korean Medicine Clinic, during consultation, we collaboratively assess the degree of skin sagging, volume distribution, and target areas. Based on the Volnewmer 300 shots vs 600 shots comparison, if your goal is overall lifting and uniform coverage, 600 shots are significantly more advantageous.

Kkeut Korean Medicine Clinic's Heartfelt Approach

Kkeut Korean Medicine Clinic ensures even heat distribution and comprehensive coverage through a 600-shot allocation design based on a grid pattern.

Kkeut Korean Medicine Clinic maximizes the cumulative thermal effect in the dermal layer through its Super Pass Technique and HVP frequency management.

Kkeut Korean Medicine Clinic transparently manages the treatment standards for each session with lifting card records.

A Subtle Difference, Different Results — Experience it at Kkeut Korean Medicine Clinic.