[Quick Results with Less Pain] Onda Lifting

What are the differentiating features of Onda Lifting treatment?

1. Personalized Design and Handpiece Configuration

At our clinic, the director personally handles the lifting design. We meticulously diagnose areas requiring improvement in individual skin elasticity or facial contours, delicately adjusting the usage ratio of 3mm and 7mm handpieces. Specifically, we carefully avoid areas where cheek hollowing is a concern and focus energy on parts where a lifting effect is needed.

2. Sufficient Energy Delivery

During facial treatments, energy can be delivered from 60,000 joules up to 120,000 joules. Rather than simply using a large amount of energy, we adjust and apply appropriate energy levels according to each individual's skin type and desired direction of improvement.

3. Skilled Treatment Speed Control

With Onda treatment, the pattern of heat transfer within tissues can vary depending on the speed at which the handpiece is moved. At our clinic, we strive to delicately control the treatment effect without unnecessary overheating by adjusting the speed—slowly for areas requiring heat concentration and quickly for sensitive areas.

4. Personalized Shot Allocation by Area

Beyond simply using 3mm and 7mm handpieces, we meticulously determine shot allocation based on the patient's facial volume and fat distribution. For instance, for individuals with less fat, we primarily use the 3mm handpiece, while for those with a double chin or more fat in the lower face, we adjust the proportion of 7mm handpiece usage.

Considerations for Onda Lifting Treatment Method

At our clinic, when performing Onda Lifting, rather than adhering solely to a 90W output from the start,

we apply a method where we quickly reach the target temperature with a high initial output of 100-110W, then maintain 90W to proceed with the treatment.

Our Clinic's Treatment Approach

Reduced Time to Tissue Response:

Even if the total energy amount is the same, starting the treatment with a higher output can lead to a more rapid increase in tissue temperature.

This shortens the time it takes for energy to accumulate sufficiently and reach the effective treatment zone,

and consequently, can help accelerate the skin tissue's response time.

Energy Loss Management in Key Reaction Zones:

By delivering energy at a high output for a short duration, the target temperature can be reached before heat widely disperses into surrounding tissues.

This can potentially elicit a concentrated response in the dermis or subcutaneous fat layer without significant damage to the epidermis.

Treatment Process Efficiency Over Time:

If the treatment is performed solely with a 90W output, the time to reach the target reaction zone may be longer.

The number of shots delivered to achieve the necessary thermal reaction might also increase.

In contrast, starting the treatment with a high output can achieve the required heat delivery in a relatively shorter time,

and subsequently, by adjusting the output, it can contribute to enhanced stability during the treatment.

What Patients May Experience:

Compared to a 90W-only treatment method,

you can expect to feel the lifting effect more quickly,

and immediately after the treatment, your skin may feel firmly tightened.

Furthermore, because the output is adjusted before the sensation of heat rises above a certain level,

it can help reduce potential pain or discomfort during the treatment.

Therefore, even with the same total energy of 60,000 joules delivered, depending on how the output is controlled,

the post-treatment results may vary,

and our clinic performs treatments considering these subtle differences.

Key Characteristics of Onda Lifting

Expected Lifting and Tightening Effects

Onda Lifting is a device that utilizes microwave (2.45GHz) energy to deliver heat to the dermis and subcutaneous fat layer. Through this, improvement in lifting and skin tightening effects can be expected.

This treatment stimulates water molecules within the skin, generating frictional heat, much like a microwave vibrates water. This thermal energy helps collagen contraction and production, and influences fat cell reduction, which can lead to immediate improvement in skin elasticity.

Microwaves have the characteristic of being selectively absorbed by water within the skin to generate heat. This can work by concentrating thermal energy delivery to the dermis and subcutaneous fat layer without causing significant damage to the epidermis.

A distinctive feature of the Onda device is that it allows for simultaneous lifting and skin elasticity improvement effects with a single device.

Lifting procedures primarily focus on improving facial contours, while tightening aims to enhance skin texture and elasticity. Onda treatment is designed to help achieve both of these goals.

Key Principles of Onda Lifting

For Onda Lifting treatments, two types of handpieces are utilized: 3mm and 7mm.

The 3mm handpiece delivers energy to the dermal layer of the skin and the border area of the subcutaneous fat.

When thermal energy is delivered to this depth, collagen and elastin fibers are produced, hyaluronic acid production is promoted, and existing collagen can contract. This allows for immediate skin tightening.

Additionally, a reduction in water content in edematous fat can lead to immediate changes in facial contours.

The 7mm handpiece reaches deeper into the subcutaneous fat layer, selectively destroying fat cell membranes and inducing fat cell apoptosis (death).

Damaged fat cells can be gradually eliminated from the body through the lymphatic system. This process can lead to improved facial contours. Changes are known to begin 2-3 weeks after the procedure, with contour changes felt around 4 weeks, and more noticeable effects experienced around 6 weeks. Since the destroyed fat cells do not regenerate, the results can be maintained for a relatively long period.

During the procedure, immediate contraction of the retaining ligaments can be induced, leading to a rapid lifting effect.

Collagen in the dermal layer of the skin is best induced to contract at temperatures of approximately 60-65 degrees Celsius. To reach this optimal temperature, a treatment technique that involves slowly moving the handpiece to sufficiently accumulate heat is important.

Microwaves have the characteristic of being selectively absorbed only by water. Thanks to this, they generate heat by concentrating energy only on fat cells and the water layer within the dermis, with minimal stimulation to nerves or blood vessels. Therefore, lifting procedures can be performed with minimized pain and reduced recovery burden.

Treatments to Consider with Onda Lifting

Onda Lifting can be performed alone, but when combined with Shurink (targeting the fascial layer) or Oligio (radiofrequency tightening), better synergistic effects can be expected.

Especially when procedures are performed on the same day, thermal energy can be accumulated more efficiently, which can help increase satisfaction with the treatment.

Our Medical Team's Philosophy

We consistently perform Onda Lifting treatments.

However, each patient's lifting design is individually tailored to their unique characteristics.

Our medical team continuously contemplates how to provide even more satisfying lifting results to patients even after the procedure.

We believe that true lifting goes beyond merely operating equipment; it involves deeply understanding skin texture and overall flow, and planning natural contour changes within that context.

Onda Lifting can create subtle differences when the skilled touch of the medical team is added, beyond the performance of the equipment itself.

If you have any questions about Onda Lifting, it is advisable to consult with a specialist.

How is Onda Lifting's Rapid Effect Possible?

Onda Lifting utilizes microwave energy to intensively deliver heat to depths of 3mm and 7mm within the skin.

When heat is delivered in this way, collagen fibers can be rapidly heated to temperatures above 65 degrees Celsius, which can lead to immediate contraction.

In some cases, changes due to lifting can be felt immediately after the procedure.

Without the need to wait for a long time, unlike other types of lifting procedures,

One of the characteristics of Onda Lifting is that you can experience elasticity and lifting changes immediately.

It can be a suitable procedure for those who expect rapid improvements.

Onda Lifting Procedure Process

1. Pre-procedure Design and Handpiece Strategy Planning

A precise design process before the procedure is an important part.

Through direct consultation, the medical team comprehensively analyzes skin elasticity, fat distribution, volume, and the direction of lifting before the procedure, meticulously planning the treatment area.

Based on the analysis results, the 3mm handpiece, which focuses on stimulating the dermal layer, and the 7mm handpiece, which targets the fat layer, are appropriately applied to each area.

This goes beyond simply using equipment; it is a process of systematic lifting treatment based on design.

2. Appropriate Energy Delivery and Detailed Settings

In Onda Lifting procedures, the total amount of energy delivered is an important consideration.

The medical team can custom apply 60,000 to over 120,000 joules of energy depending on the individual's condition, meticulously planning the appropriate treatment time and cooling strategies to prevent overheating.

3. Handpiece Speed and Heat Accumulation Control

The effectiveness of Onda treatment is closely related to the degree of thermal energy accumulation.

During the procedure, the handpiece speed is kept slow initially to accumulate heat, and then switched to a faster speed to reduce skin irritation and the risk of burns.

Precise control of the procedure is achieved through extensive clinical experience.

4. Customized Handpiece Allocation and Shot Planning

When facial volume is abundant or reduced skin elasticity is the main concern, the treatment plan should be approached differently.

Considering the patient's facial volume, fat distribution, and skin thickness, a suitable combination of 3mm and 7mm handpieces is used.

For example, for the chin area with a thick fat layer, the 7mm handpiece can be primarily used, while for the submalar area where hollowing is a concern, the 3mm handpiece can be predominantly used.

The procedure is performed by applying a sophisticated, personalized strategy rather than a simple shot distribution method.

5. Medical Team's Meticulous Treatment Design and Continuous Research

We have extensive experience with Onda Lifting procedures, deepening our understanding of diverse patient cases.

Nevertheless, the treatment design is applied differently for each individual every time.

Beyond consultation hours, the medical team meticulously analyzes changes in the patient's face and continuously researches the most suitable energy settings and handpiece application methods.

Onda Lifting goes beyond just using a treatment device; the results can vary depending on which specialist designs the procedure.

Onda Lifting is not merely a mechanical procedure; it is a treatment where the medical team's skilled techniques and judgment are crucial.

Who Can Benefit from the Procedure

• 01. Those who wish to improve double chin, buccal fat, and define the jawline.
• 02. Those concerned about deep nasolabial folds and skin sagging.
• 03. Those who are not satisfied with contour or elasticity improvements after previous lifting procedures.
• 04. Individuals aged 30s to 50s who are concerned about both fat and reduced elasticity.
• 05. Those who prefer lifting procedures that minimize pain and recovery burden.

Benefits of the Procedure

• 01. Thanks to its powerful cooling function, it can help reduce pain during the procedure.
• 02. Tightening effect that can be felt immediately after the procedure.
• 03. Minimal burden as daily life can be resumed immediately after the procedure.

Procedure Steps

• STEP 01. 1:1 consultation with the medical team after cleansing.
• STEP 02. Apply oil to the treatment area.
• STEP 03. Proceed with Onda Lifting treatment.

Post-Procedure Precautions

• ㆍCleansing and makeup are possible from the day of the procedure.
• ㆍIt is recommended to refrain from using saunas, jjimjilbangs, drinking alcohol, and smoking for about one week after the procedure.
• ㆍDue to the warmth from the procedure, the skin may become somewhat dry, so it is recommended to apply a sufficient amount of moisturizer.
• ㆍWhen engaging in outdoor activities, it is advisable not to forget to apply sunscreen to protect your skin.