[Shrink 100 shots for 7900 KRW Event] Shurink Universe

Shrink Universe Treatment Guide

*What is Focused Ultrasound Lifting?

HIFU (High-Intensity Focused Ultrasound) lifting, which utilizes high-intensity focused ultrasound energy, delivers energy to specific depths of the skin in a non-surgical manner. This can help induce collagen regeneration, improving skin elasticity and lifting.

This treatment creates an instantaneous high-temperature state by focusing ultrasound energy on specific points within the skin, much like a magnifying glass concentrates sunlight. During this process, microscopic thermal coagulation points (TCPs) are formed within the skin tissue.

These coagulation points, exposed to high temperatures of approximately 60-70 degrees Celsius, stimulate only the heat-concentrated areas without placing significant burden on surrounding tissues, thereby promoting collagen denaturation and regeneration.

In particular, HIFU is one of the non-invasive devices that can reach the SMAS layer (Superficial Musculoaponeurotic System), located deep within the skin. This SMAS layer is the same anatomical structure primarily involved in pulling the skin during surgical facelifts.

When energy is delivered to the SMAS layer, immediate tissue contraction and remodeling of collagen fibers can begin. Through this, long-term lifting effects can be expected.

Furthermore, HIFU treatment passes through the epidermis with minimal surface damage, resulting in a relatively short recovery period. Its applicability to various skin types is also an advantage.

*Expected Effects per Cartridge (1.5mm / 3.0mm / 4.5mm / 6.0mm)

1.5mm (Upper Dermis)

Can help improve fine wrinkles.

Mainly used for delicate wrinkle areas such as around the eyes, glabella, and mouth.

Expected to improve skin texture, pore management, and tone correction.

3.0mm (Lower Dermis)

Can contribute to improving elasticity in the cheeks and nasolabial folds.

Suitable for initial sagging management and can help with pore tightening.

Can contribute to restoring skin's inner elasticity.

4.5mm (SMAS Layer)

Can help improve jowls, jawline, and double chin lifting.

Improvement in sagging can be expected through deep tissue contraction.

Can be considered for moderate to severe sagging.

6.0mm (Fat Layer)

Can be considered for areas with deep subcutaneous fat, such as a double chin.

Also applicable for body treatments such as the abdomen, thighs, and arms.

By targeting the fat layer, it can contribute to the contraction of fat cells and improvement in volume.

The treatment objective for each cartridge varies depending on the targeted skin layer.

1.5mm is primarily used for fine wrinkles and skin texture management, 3.0mm focuses on elasticity and tightening, and 4.5mm emphasizes lifting. The 6.0mm cartridge is utilized for fat layer management.

*Features of DOT Mode and MP Mode

DOT mode allows for precise energy delivery point by point, enabling delicate treatment planning. This can help with immediate tissue contraction.

It can be applied with safety in mind, especially when treating contoured and sensitive areas such as around the eyes, mouth, chin, and nasolabial folds. When utilized by an experienced practitioner, the benefits of customized lifting can be further maximized.

MP mode delivers energy linearly at regular intervals, acting relatively quickly on wider areas. This can contribute to inducing a lifting effect for the entire face.

This mode can be considered when desiring fast and efficient lifting treatment for large areas, or when aiming to reduce discomfort from pain.

Using DOT and MP modes together can yield complementary effects. Combining overall contour lifting (MP) with point lifting for specific areas (DOT) allows for a more delicate approach.

*Special Advantages of Shrink Universe Treatment

The strengths of Shrink Universe treatment are as follows:

1. Systematically utilizing various types of handpieces,

2. And when applying a suitable combination of DOT mode and MP mode,

More in-depth treatment results can be expected.

Areas with many curves and contours on the face are precisely treated with a pen-type handpiece, while large areas are efficiently treated with MP mode.

Subsequently, the method of intensively applying DOT mode to key lifting areas enables delicate, customized treatment that considers the overall harmony of the face.

The depth of energy, the delicacy of the handpiece, and the appropriate combination of modes are crucial aspects of personalized lifting procedures. This is not just a simple procedure, but requires meticulous planning that considers the patient's condition.

Those who desire natural lifting without significant disruption to daily life, or those concerned with overall skin elasticity loss and sagging, may consider Shrink Universe procedures.

Shrink Universe, is it less effective than Ulthera?

When the procedure is performed under identical conditions,

for example, if the procedure is performed with the same output, depth, and total number of shots,

the difference in effectiveness between the two devices may not be significantly noticeable.

Both devices utilize High-Intensity Focused Ultrasound (HIFU) technology.

This technology precisely delivers thermal energy to the deep SMAS layer within the skin,

inducing collagen contraction and promoting new collagen production to achieve a lifting effect.

To illustrate with an example,

If Shrink Universe's Dot Mode delivers 1.0J (Joule) for 300 shots,

or Ulthera delivers 1.0J for 300 shots, a total of 300J of energy accumulates in the tissue in both cases.

The duration of HIFU treatment depends not simply on the name of a specific device,

but rather on how the patient's skin tissue responds to the thermal coagulation reaction.

The extent of this skin tissue response

tends to be determined by the total amount of focused ultrasound energy.

Procedure Information

1. Shrink Universe utilizes High-Intensity Focused Ultrasound (HIFU) to deliver energy to the SMAS (superficial muscular aponeurotic system) layer of faces with reduced elasticity and sagging due to aging. This procedure helps collagen regeneration and contracts lax tissues, which can contribute to overall elasticity improvement, making it the 2nd generation lifting version of the original Shrink.

2. Compared to the previous Shrink, the treatment speed is enhanced, potentially reducing treatment time. Additionally, by utilizing the Ultra Booster pen-type handpiece, ultrasound energy can be delivered more precisely to curved areas such as around the eyes, as well as to the V-line, cheeks, and cheekbones, allowing for intricate lifting procedures.

3. The increased laser irradiation speed helps reduce treatment time and minimize discomfort during the procedure. Approximately 400 thermal coagulation points are created per shot, delivering concentrated energy, which can help improve the lifting effect.

Advantages of the Procedure

·         01. It forms approximately 400 thermal coagulation points to precisely deliver energy.

·         02. It utilizes two ultrasound modes, allowing for customized treatment based on skin condition and area.

·         03. It can help meticulously lift even small, curved areas.

·         04. With a bidirectional irradiation method, treatment time is shortened, pain burden is reduced, and improved skin elasticity can be expected.

We recommend this procedure for those who:

·         01. Are concerned about sagging facial lines leading to changes in their impression.

·         02. Desire lifting for contoured and delicate areas, along with an overall elastic facial line.

·         03. Have significant concerns about wrinkles due to aging.

·         04. Are considering a tighter and more refined lift than with the existing Shrink.

Procedure Steps

·         STEP 01. Self-cleansing

·         STEP 02. Gel Application

·         STEP 03. Shrink Universe Procedure

·         STEP 04. Procedure Completion

Post-Procedure Precautions

ㆍIf your skin is thin, temporary tip marks may appear on the treated area. These marks usually subside naturally within 1-2 weeks, so it is recommended to observe the progress.

ㆍAfter the procedure, minor symptoms such as slight redness, warmth, throbbing, swelling, pain, toothache, or tooth sensitivity may appear in the treated area. While there are individual differences in these symptoms, they generally improve within 1-2 weeks, so there is no need to worry excessively.

Customized Output Adjustment – Procedure Considering Pain and Effectiveness

·         It is important that Shrink procedures are performed with finely adjusted output intensity according to individual skin condition and pain sensitivity. This is an approach that considers both the effectiveness and comfort of the procedure.

During the procedure, we carefully check for any discomfort and adjust the treatment energy considering each individual's pain tolerance. This ensures a comfortable experience while achieving satisfactory results.

Ultherapy Mode (Dot Output) Combined

Shurink Universe primarily delivers energy in a linear fashion, meaning the thermal energy tends to be more widely dispersed, unlike Ultherapy's dot-type delivery method.

However, Shurink also has an Ultherapy Mode (dot output) feature that delivers energy in a dot-like form. Using this method, more concentrated lifting effects can be expected in specific areas.

While this dot output may slightly extend the procedure time, we apply Ultherapy Mode to necessary areas for a more precise and detailed treatment.

The Importance of Detailed Design Planning – Precise Treatment in Necessary Areas

Even with fewer shots, we create a thorough design plan before the procedure to consider facial asymmetry and achieve the desired lifting effect.

Rather than simply relying on the number of shots, we strive to achieve better results by specifically planning and designing where and how to deliver energy to each individual's face.

Method of Fine-Tuning Tip Direction

Precise Tip Direction Setting

We set the tip's treatment direction diagonally or upward, taking into full consideration the facial contours and the direction of gravity.

This adjustment guides the energy to act in a direction effective for lifting tissues, and

Through this, a natural tightening effect can be expected.

During Shurink procedures, we carefully consider even the tip direction.

* Application of Tilt & Push-up Technique

Instead of simply placing the tip perpendicularly on the skin,

we perform the procedure with the tip slightly tilted, gently pushing the skin upward.

This treatment method helps the coagulation points generated by ultrasonic energy to form in an upward direction.

Through this, a lifting effect where the facial structure is pulled upward can be expected.

Related studies have also reported that this technique can induce numerically significant lifting effects.

We perform treatments with such detailed considerations in mind. We don't just stop at design; we focus on ensuring the effects manifest as planned during the actual procedure.

5% Discount per 10 Minutes of Wait Time – We Respect Our Patients' Valuable Time

We value our patients' time and do our best to manage appointments and waiting times accordingly.

Should an unavoidable waiting time occur, we offer a 5% discount for every 10 minutes as a token of respect for your time.

Pain Management Strategies for High-Intensity Procedures

Pain during Shurink treatment

can be alleviated by using a vibration device.

High-intensity ultrasound lifting, by its nature,

may involve some degree of pain during the procedure.

To minimize this pain as much as possible,

we actively utilize a vibration tool during treatment.

Vibration stimulation reduces the brain's perception of pain,

based on the 'Gate Control Theory.'

In fact, many who have experienced this method

often say that the pain is less.

In addition,

based on our diverse clinical experience and know-how,

we apply various methods to alleviate pain.

These include adjusting the treatment angle, optimizing energy delivery methods, and techniques to alleviate tooth vibration, among others.

We make adjustments considering even these subtle details.

From the moment the procedure begins until the results are achieved,

We plan for our patients to feel more comfortable throughout the procedure.

Concerns about pain may make you hesitate to undergo the procedure.

We focus on minimizing discomfort during the procedure and helping you achieve your desired results.

Our medical team performs procedures with the goal of patient-centered comfort and positive results.